Vievu multidock manual7/8/2023 There are also other customer specific settings that can be changed. In that case, please contact your administrator ver Ĥ Architecture MULTI-DOCK ARCHITECTURE Webserver File Storage Firmware Update HTTPS: TCP 443 HTTP: TCP 80 SSH: TCP 22 Multi-Dock UDP 123 Internet Time Source NTP (optional) Workstation Configuration and Troubleshooting Description/Resource URI IP Address Port VIEVU Solution Webserver Provided in welcome Provided in 443 (TCP, https) welcome VIEVU Solution File Storage Provided in welcome Provided in 443 (TCP, https) welcome Firmware Update Location .net (TCP, https) Internet Time Source NTP (optional) (UDP) Multi-Dock Configuration Webpage (TCP, http) Multi-Dock SSH (VIEVU support technician use only) (TCP, SSH) ver ĥ MAIN MENU Configuration The Configuration page is where settings may be adjusted to suit the specific VIEVU Solution or VERIPATROL setup being used. If login fails, the credentials may have already been changed. ![]() At the login screen, use the following default credentials Login ID: admin Password: vievu123 You will be brought to the Configuration page. LOG IN Open an internet browser and navigate to the IP address of the Multi-Dock Network. Once you have the IP address, you may access the interface and log in to configure the multi-dock. The Multi-Dock Network is configured via an internet browser. To easily determine the IP address, you may connect a USB flash drive to the USB port in the rear of the multi-dock a text file will be created containing the IP address assigned to the Multi-Dock Network. The multi-dock will use DHCP to acquire an IP address on the network. To set up the Multi-Dock Network, connect an Ethernet cable and power cable to the rear of the multi-dock. The multi-dock will be connected to an Ethernet cable and communicate with the network to automatically transfer video files to the VIEVU Solution or VERIPATROL. The only thing that I can think of out of the ordinary that the drives are formatted as NTFS which is not in the manual) but I cannot think of why this would be a problem.3 GETTING STARTED Multi-Dock Setup The Multi-Dock Network is a network enabled docking station for VIEVU cameras. When I re-plug the Mutldock behaves as expected with the drives remounting and the lights flashing only when the SSDs are accessed. I have to either cut power or the USB connection to the Multidock. ![]() When I boot the Windows 10 PC in the morning (with the drives still flashing on the Multidock) the drives do not remount. This continues indefinitely (at least overnight) regardless of the computer being shutdown. When I shutdown the computer off the 2 drive bays start flashing as though being accessed, even though they weren't being accessed before the shutdown and the lights were off. The USB-C A drives are connected to a USB-A 3.1 port using a USB 3.1 cable. I am aware that he manual says to use ExFAT so one of my questions below is based around that. Both are formatted to NTFS as they came from other systems. The first is a Samsung EVO 860 4TB and the second a Samsung EVO 860 2TB. I have it set to divide the drives between two computers but currently only the A drive is connected, it contains two SSDs. ![]() New user here - I have recently purchased a Multidock 10G for use with a music studio based around Windows 10.
0 Comments
Leave a Reply. |